FaultModel is not working as expected for V8.7 and V8.8 [closed]

asked 2018-01-31 17:58:46 -0500

building_performance gravatar image

updated 2018-05-21 21:51:48 -0500

I am doing fault simulation by FaultModels in EnergyPlus. I found two fault models are not working correctly: FaultModel:TemperatureSensorOffset:OutdoorAir, FaultModel:TemperatureSensorOffset:ReturnAir. My baseline model is from the reference building library(fault-free, ASHRAE90.1_MediumOffice_STD2013_Chicago), with simulated total source energy: 5890.77GJ

fault1: OA sensor offset; i vary the sensor offset to be 0, 1, 2, 5, 8, degreeC The simulated total source energy: 5884.79GJ, for all offset values (EnergyPlus V8.8). But for EnergyPlus V8.7, the simulated total source energy: 5890.77GJ, for all offset values. (The same to fault-free model)

fault2: RA sensor offset; i vary the sensor offset to be 0, 1, 2, 5, 8, degreeC The simulated total source energy: 5884.79GJ, for offset values (EnergyPlus V8.8). But for EnergyPlus V8.7, the simulated total source energy: 5890.77GJ, for all offset values. (The same to fault-free model)

I am sure the setup is correct for all cases. How to solve such issue? Thanks.

edit retag flag offensive reopen merge delete

Closed for the following reason question is not relevant or outdated by Julien Marrec
close date 2020-01-28 10:09:21.778981

Comments

You can file a bug report here.

__AmirRoth__ gravatar image __AmirRoth__  ( 2018-01-31 19:14:36 -0500 )edit
Julien Marrec gravatar image Julien Marrec  ( 2020-01-28 10:09:13 -0500 )edit