I find that the ideal air load result is very low, about 70w/m2 or less. How do you deal with this problem? anyone can help?
How can I find the total heat load? someone said ventilation load isn't taken into account when running the ideal air load, I tried "design specification outdoor air", "space infiltration air flow rate" and "zone ventilation air flow rate", but cannot add the ventilation load.
Report the results using:
OutputControl:Table:Style,
TabAndHTML; !- Column Separator
Output:Table:SummaryReports,
AllSummary; !- Report 1 Name
These are the inputs specific to outdoor air for the ZoneHVAC:IdealLoadsAirSystem. Enter the design specification outdoor air object name here and choose a name for the outdoor air node. You will also need to specify this node as an outdoor air node.
ZoneHVAC:IdealLoadsAirSystem,
YourDesignSpecName, !- Design Specification Outdoor Air Object Name
Outside Air Inlet Node 1, !- Outdoor Air Inlet Node Name
, !- Demand Controlled Ventilation Type
, !- Outdoor Air Economizer Type
OutdoorAir:Node,
Outside Air Inlet Node 1; !- Name
Asked: 2017-08-30 03:53:56 -0600
Seen: 1,492 times
Last updated: Sep 16 '17
