Template construction error
I used the template generator to import 90.1 2010 /2007 construction set for weather zone 3. However, the severe errors show as follows. Any reasons why the template construction is wrong ?
** Severe ** Out of range value Numeric Field#4 (Specific Heat), value=0.23885, range={>=100}, in MATERIAL=CEMENT BONDED PARTICLE BOARD
** Severe ** Out of range value Numeric Field#4 (Specific Heat), value=0.38215, range={>=100}, in MATERIAL=CHIPBOARD FLOORING
** Severe ** Out of range value Numeric Field#4 (Specific Heat), value=0.23885, range={>=100}, in MATERIAL=CONCRETE DECK
** Severe ** Out of range value Numeric Field#4 (Specific Heat), value=0.24601, range={>=100}, in MATERIAL=INSULATION
** Severe ** Out of range value Numeric Field#4 (Specific Heat), value=0.23885, range={>=100}, in MATERIAL=MEMBRANE
** Severe ** Out of range value Numeric Field#4 (Specific Heat), value=0.23885, range={>=100}, in MATERIAL=PLASTERBOARD
** Severe ** Out of range value Numeric Field#4 (Specific Heat), value=0.10748, range={>=100}, in MATERIAL=RAINSCREEN
** Severe ** Out of range value Numeric Field#4 (Specific Heat), value=0.23885, range={>=100}, in MATERIAL=REINFORCED CONCRETE
@Bo_Lin, can you let me know what version of OpenStudio you are using, also can you let me know the history of the file you ran the template on, specifically did it already have some constructions in it? I'm not finding materials by these names in the `OpenStudio_Standards_materials.json file that ships with the OpenStudio Standadards gem.
You may want to purge un-used constructions and materials and see if that helps. If not you need to identify what surfaces have constructions that use this material.
@David Goldwasser It is openstudio 2.1. Yes, I have some constructions in it before, but all purged. Now I imported construction for 189l1-2009. Seems worked fine.
Can we close this question then?