Fatal error when using energyplus

asked 2017-08-08 08:00:09 -0600

saravanan17
91 ●2

updated 2017-08-08 09:26:43 -0600

__AmirRoth__

4446 ●5 ●17 http://bleedinggreenna...

This is a severe error and am unable to rectify it....

Severe  ** Control Type Schedule=ZONE CONTROL TYPE
   **   ~~~   ** ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone.
   **   ~~~   ** ..reference ZoneControl:Thermostat=SPACE1
   **   ~~~   ** ..reference ZONE=4DABF8
 ** Severe  ** Control Type Schedule=ZONE CONTROL TYPE
   **   ~~~   ** ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone.
   **   ~~~   ** ..reference ZoneControl:Thermostat=SPACE2
   **   ~~~   ** ..reference ZONE=5C1065
   ** Severe  ** Control Type Schedule=ZONE CONTROL TYPE
   **   ~~~   ** ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone.
   **   ~~~   ** ..reference ZoneControl:Thermostat=SPACE3
   **   ~~~   ** ..reference ZONE=A3C193
   ** Severe  ** Control Type Schedule=ZONE CONTROL TYPE
   **   ~~~   ** ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone.

This error comes for all the zones of my case..

How to rectify it.. Iam using energyplus with sketchup am not using openstudio.

edit retag flag offensive close merge delete

Comments

can you post a snippet of how you've defined the ZoneControl:Thermostat object?

mdahlhausen ( 2017-08-08 11:42:27 -0600 )edit

Here it is.

HVACTemplate:Thermostat, 
  Constant Setpoint Thermostat, !- Name 
  Heating Setpoint Schedule, !- Heating Setpoint Schedule Name 
  20, !- Constant Heating Setpoint {C} 
  Cooling Setpoint Schedule, !- Cooling Setpoint Schedule Name 
  25; !- Constant Cooling Setpoint {C}

ZoneControl:Thermostat, 
  Space2, !- Name 
  5C1065, !- Zone or ZoneList Name 
  zone control type , !- Control Type Schedule Name 
  ThermostatSetpoint:SingleCooling, !- Control 1 Object Type 
  cooling setpoint ; !- Control 1 Name

saravanan17 ( 2017-08-08 23:31:59 -0600 )edit

add a comment

answered 2017-08-08 23:31:03 -0600

saravanan17
91 ●2

updated 2017-08-09 05:48:20 -0600

HVACTemplate:Thermostat, Constant Setpoint Thermostat, !- Name Heating Setpoint Schedule, !- Heating Setpoint Schedule Name 20, !- Constant Heating Setpoint {C} Cooling Setpoint Schedule, !- Cooling Setpoint Schedule Name 25; !- Constant Cooling Setpoint {C}

ZoneControl:Thermostat, Space2, !- Name 5C1065, !- Zone or ZoneList Name zone control type , !- Control Type Schedule Name ThermostatSetpoint:SingleCooling, !- Control 1 Object Type cooling setpoint ; !- Control 1 Name

Along with this error am facing the following error.. help me to resolve it..

* Severe * InitZoneAirSetpoints: Zone="7788C8" has specified a Thermostatic control but is not a controlled zone. * ~~~ * ...must have a ZoneHVAC:EquipmentConnections specification for this zone. * Fatal * InitZoneAirSetpoints - program terminates due to previous condition. ...Summary of Errors that led to program termination: ..... Reference severe error count=1 ..... Last severe error=InitZoneAirSetpoints: Zone="7788C8" has specified a Thermostatic control but is not a controlled zone. *** Warning: Node connection errors not checked - most system input has not been read (see previous warning).

Comments

These are the zone control thermostat

saravanan17 ( 2017-08-08 23:31:43 -0600 )edit

add a comment

Your Answer

Please start posting anonymously - your entry will be published after you log in or create a new account.

Fatal error when using energyplus

Comments

1 Answer

Comments

Your Answer

Training Workshops

Careers

Question Tools

Stats

Fatal error when using energyplus edit

Comments

1 Answer

Comments

Your Answer

Training Workshops

Careers

Question Tools

Stats

Fatal error when using energyplus