The problem is the missing Loop Temperature Setpoint Node Name field in the Cooling plant. You could delete the cooling plant and re-create, but I can also try to hand fix the file and send it back to you. Might be a few days before I can get the file back to you.
OS:PlantLoop,
{83c1f9b2-5811-414c-8788-c6dedaca4112}, !- Handle
Cooling, !- Name
, !- Fluid Type
, !- User Defined Fluid Type
, !- Plant Equipment Operation Heating Load
, !- Plant Equipment Operation Cooling Load
, !- Primary Plant Equipment Operation Scheme
, !- Loop Temperature Setpoint Node Name
30, !- Maximum Loop Temperature {C}
, !- Minimum Loop Temperature {C}
, !- Maximum Loop Flow Rate {m3/s}
, !- Minimum Loop Flow Rate {m3/s}
Autocalculate, !- Plant Loop Volume {m3}
{e1947c24-f48f-4c26-ade2-140a8b9a47b6}, !- Plant Side Inlet Node Name
{d1c765e5-2ebf-4d3b-a71e-fa4252cfa43f}, !- Plant Side Outlet Node Name
, !- Plant Side Branch List Name
{0666917d-ac2b-434b-b6ae-f6a011ef49e0}, !- Demand Side Inlet Node Name
{5d2e1a2d-b8d1-45d1-af94-553c74f632bd}, !- Demand Side Outlet Node Name
, !- Demand Side Branch List Name
, !- Demand Side Connector List Name
Optimal, !- Load Distribution Scheme
, !- Availability Manager List Name
, !- Plant Loop Demand Calculation Scheme
, !- Common Pipe Simulation
; !- Pressure Simulation Type
+1 for the avatar. Actually +1000.
I can re-create it crashing when trying to export to an IDF in 2.1, which would also of course cause the simulation to fail. I'll post an answer when I know more.
Update: this is an issue on our end. We narrowed the crash down to the plant loops, but not sure why yet. Once we identify the issue hopefully we can give you a cleaned up model that avoids the issue.
Do you have good news? I really appreciate the hard work you do.