Simulation Timestep vs. OutputVariable Reporting Frequency

asked 2017-02-20 15:11:12 -0500

BControl
43 ●5

updated 2017-03-31 16:01:46 -0500

__AmirRoth__

4436 ●5 ●17 http://bleedinggreenna...

In EnergyPlus, I am trying to report the output variable in a different time frequency, comparing to the simulation Timestep. Is it possible, or it needs to be post-processing?

For example, the simulation Timestep is set as 60, is it possible to output the energy usage in 0.5h time interval, not hourly time interval?

Timestep,
    60;                       !- Number of Timesteps per Hour

...

Output:Variable,,Facility Total Purchased Electric Energy,Timestep;

answered 2017-02-20 15:30:35 -0500

Julien Marrec

29042 ●85 ●74 http://www.effibem.com/

updated 2017-02-21 04:15:17 -0500

You can't.

You have to request output at the Timestep level, which will give you in your case output at one-minute interval (60 timesteps per hour) and then do post-processing to get 30-min interval average / sum depending on the variable you're looking at (any consumption would be a sum, any rate would be an average)

edit flag offensive delete link

Comments

Thanks for your answer! That's helpful to know that EnergyPlus cannot do this. BTW, how did you get the 0 of 60 to a superscript?

BControl ( 2017-02-20 17:26:17 -0500 )edit

On a french mac keyboard, the degree sign ° is right next to zero, I must have made a mistake when typing. Worth nothing that there is a <sup></sup> tag on Unmet Hours, but that won't produce a degree sign, it'll do this: ⁰. If you have a Windows machine and a numeric keypad, press ALT and while maintining it type either 0176 or 248 on the numeric keypad to produce a ° (it looks like a lot of work initially, but when I was working in the US I was using it many times a day without flinching)