Monthly Building Sensible Heat Gain Components

asked 2016-11-04 18:45:57 -0500

Archidoc
41 ●2

updated 2020-01-26 11:42:17 -0500

__AmirRoth__

4436 ●5 ●17 http://bleedinggreenna...

Hi everyone,

E+ reports give "Annual Building Sensible Heat Gain Components" for the Entire Facility under the Sensible Heat Gain Summary, which seems to be default when the "Output:Table:Summary Reports" object figure in the object list. Among other, the default variables for the entire facility are:

HVAC Zone Eq & Other Sensible Air Heating [kBtu]
HVAC Zone Eq & Other Sensible Air Cooling [ton-hrs]
People Sensible Heat Addition [kBtu]
Lights Sensible Heat Addition [kBtu]
Equipment Sensible Heat Addition [kBtu]
Window Heat Addition [kBtu]
Infiltration Heat Addition [kBtu]
Opaque Surface Conduction and Other Heat Addition [kBtu]
Window Heat Removal [kBtu]
Infiltration Heat Removal [kBtu]
Opaque Surface Conduction and Other Heat Removal [kBtu]

I am looking for a Monthly one. Does anyone know to get such report? Many thanks all

Olivier.

edit retag flag offensive close merge delete

Comments

Please tag your question with the software you are using, e.g., energyplus. That way, the question ends up in the inbox of the right people. Thanks.

__AmirRoth__ ( 2016-11-10 10:38:16 -0500 )edit

Hi Amir,

Thanks for picking this up! Will do next time. Hopefully will get some answer back from the question above as it requires quite a bit of post production to report manually all the zones as variables and then to sum the values up in Excel filtering through all the zones.

Archidoc ( 2016-11-10 11:26:17 -0500 )edit

add a comment

Comments

how to set the Output:Table:SummaryReports in Openstudio?

thanks

Yi ( 2019-09-10 20:12:42 -0500 )edit

@Yi OpenStudio will always generate the Output:Table:SummaryReports with many summary reports included. To review these summary reports, go to the Results Summary tab in OpenStudio (bottom tab icon on left edge), then select EnergyPlus Results in the Reports drop-down. If you want to modify the content or format of these reports, use an EnergyPlus Measure like Set Output Table to IP Units.