Aggregate peak and off-peak energy use in custom blocks

answered 2016-10-04 07:04:53 -0500

One approach is to use UtilityCost:Tariff to perform the aggregation. If you look at the output generated by the 5ZoneEconomicsTariffAndLifeCycleCosts.idf you can see in the ExampleF Tariff Report under the Native Variable table that PeakEnergy and OffPeakEnergy are shown monthly. This approach can be used for fuels as well as electricity. Here are links to learn more about the UtilityCost:Tariff object and specifically the Example F. This works well for up to four different periods of time (Peak, OffPeak, MidPeak and Shoulder).

Another approach is to use Output:Table:Monthly or Output:Table:Annual and use a schedule as the first column and aggregate it as HoursNonZero and then the second column use the meter and the aggregation as SumOrAverageDuringHoursShown. Then repeat these columns but using HoursZero the second time. This works well when trying to aggregate using a schedule with zeros and other values but multiple schedules are needed if you need to break it down into three or more periods of time.

edit flag offensive delete link

Comments

Thanks @JasonGlazer Probably example F approach will work for me, but I would try the second method to know ho it is done.

rkbest ( 2016-10-04 07:59:12 -0500 )edit

1st approach Based on the documentation I think I would require 1. UtilityCost:Tariff; 2 Four UtilityCost:Charge:Simple for peak and off-peak blocks; 3. No qualifying block (as I know this tariff applies); 4. UtilityCost:Charge:Block for demand charges. Question -How to I include the demand blocks?:- the tariff structure says- $3.12 per kW of billing demand, plus $6.13 per kW of peak billing demand Billing demand- highest measured 30-minute interval kW demand during billing period Peak billing demand- highest measured 30-minute interval kW demand during peak period

rkbest ( 2016-10-04 14:56:55 -0500 )edit

If this does not exist (as per my understanding), I think this could be a useful feature for future EP versions to have demand block based on custom interval qualifiers.

rkbest ( 2016-10-04 15:34:32 -0500 )edit

To get a 30-minute interval for kW demand, use the UtilityCost:Tariff field called Demand Window Length and set it to HalfHour. It is not clear from the rest of your tariff description what your remaining questions are. Can you add a link to the tariff?

JasonGlazer ( 2016-10-05 06:32:57 -0500 )edit

Second approach :- After adding Output:Table:Annual, Peak Energy Use, !- Name , !- Filter OnPeakTime, !- Schedule Name Electricity:Facility, !- Variable or Meter or EMS Variable or Field 1 Name SumOrAverage, !- Aggregation Type for Variable or Meter 1 0, !- Digits After Decimal 1 I get a table column as 'Site Outdoor Air Humidity Ratio [kWh]' with numbers that loop like kWh values and not any ratio. Is this a bug? @JasonGlazer

rkbest ( 2016-10-14 15:50:40 -0500 )edit

see more comments

Aggregate peak and off-peak energy use in custom blocks

1 Answer

Comments

Your Answer

Careers

Question Tools

Stats

Aggregate peak and off-peak energy use in custom blocks edit

1 Answer

Comments

Your Answer

Careers

Question Tools

Stats

Aggregate peak and off-peak energy use in custom blocks