OpenStudio error in Four Pipe Induction ATU: Induced Air Inlet Node Name is blank

edit

I'm up against a recurring error very similar to the one described here.

The issue is a blank field for the Induced Air input field of a Four Pipe Induction Terminal supplied by Air Handling Unit 1. The interesting thing here is that every time I add a new terminal unit in a new zone the error seems to move to another (the new) terminal unit.

** Severe  ** IP: IDF line~7462 Error detected in Object=AIRTERMINAL:SINGLEDUCT:CONSTANTVOLUME:FOURPIPEINDUCTION, name=THB.08
**   ~~~   ** Field [Induced Air Inlet Node Name] is required but was blank

*************   7457   THB.08,                                 !- Name
*************   7458   ,                                       !- Availability Schedule Name
*************   7459   0.48,                                   !- Maximum Total Air Flow Rate {m3/s}
*************   7460   2.5,                                    !- Induction Ratio
*************   7461   Node 622,                               !- Supply Air Inlet Node Name
*************   7462   ,                                       !- Induced Air Inlet Node Name

I tried changing the type of analysis to detailed analysis as mentioned here, but that didn't make any difference.

In addition, the simulation ran before, but once I added additional ZoneExhaust and Ventilation:DesignFlowRate objects it started failing, maybe that has something to do with it.

Here is a link to the OpenStudio file.