If you actuate a schedule, can you use it in another program afterwards or do you have to input it as a Sensor first?
I am making a schedule, for example, if CO2 is higher than 800 ppm (from a sensor), I want a certain schedule (year) to be set to 1. If not it should be set to 0.
The same for another schedule for the temperature, if it is above 25 degrees Celsius; the schedule should be 1 and if not it should be 0.
But afterwards I want the schedules that I actuated (temp and CO2) which consists of only 1's and 0's to be used in another Program.
For this program I want a venting schedule that can read if the actuated schedules are both or one of both equal to 1, so that the venting schedule can say 1. So that this schedule can be used in my AirflowNetwork per zone.
please always tag your question with the name of the appropriate software you're using (energyplus here). This allows people monitoring this tag to see your question. I know this can seem like this is an energyplus and openstudio website, but it is actually software agnostic (just do a search for equest or iesve and you'll see)
Tagging is done in the tag section, not the post itself.