I'm getting a "cannot compute floor area" error for one zone. This happens while exporting to SDD/xml from openstudio v 1.10.0. Ive gone through the zone trouble shooting, it has multiple zones below and has some ground contact floor area as well. is there a limit to floor surfaces or matched surfaces in one zone?
Thanks,
Dustin
@Dustinl, if a blank polylp tag is present (denoted by a single <polylp/> tag rather than an opening and closing tag) then it means the .floorPrint method on the space failed. This method attempts to take all the floor polygons and find one large polygon that bounds them all. Seeing as you only have one space with the issue, what you can do is manually find the outer bounding coordinates of all the floor polygons and add it to your XML file by hand. It's not an ideal scenario if this error occurs a lot, but its a quick fix for just one or two spaces.
Asked: 2016-02-10 15:45:58 -0500
Seen: 230 times
Last updated: Feb 11 '16
.jpg "dradair")
Hi @Dustinl, please use existing tags for search and routing purposes. Nobody subscribes to the tag 'cannot' or 'compute'. 'cbecc-com' and 'openstudio' are more useful tags.
@Dustinl if you open your SDDXML file in a text editor, is there a blank <polylp/> tag that is a child of the <spc> tag for the space where that error occurs?
Right Here? <spc> <name>Permanent Exhibit Gallery Interior</name> <vol>55263.9</vol> <area>2908.63</area> <polylp/> <thrmlznref>Thermal Zone 2.5</thrmlznref> <intflr>
This is the only place where <polylp/> occurs.