Error: Did not find correct AirLoopHVAC

asked Jan 21

ms0130's avatar

updated Jan 21

I'm working on a MFH model with ASHP. 18 conditioned zones in total, distributed among three floors: bottom, middle, and top. I'm getting the following error for all top-floor zones but not the other zones:

* Severe * AirLoopHVAC:UnitaryHeatPump:AirToAir = UNITARY HP AIRTOAIR LIVING_UNIT1 LIVING_UNIT3_BACKROW_TOPFLOOR * Severe * Did not find correct AirLoopHVAC. * ~~~ * Specified Controlling Zone or Thermostat Location = LIVING_UNIT3_BACKROW_TOPFLOOR

I have double checked all the zone naming and zone selection, including branch and branch lists, and I couldn't tell what happen to the top-floor AirLoopHVAC objects. I would love to attach the original idf if anyone could help. DESPERATE.

The weather file and the idf are saved in this link: https://drive.google.com/drive/folder...

Preview: (hide)

Comments

@ms0130 can you upload your model to Google Drive, Dropbox, etc. and then share a URL for others to download? That would help others provide better solutions.

Aaron Boranian's avatar Aaron Boranian  ( Jan 21 )

Just added! Thanks!

ms0130's avatar ms0130  ( Jan 21 )

Ideally, no Google Drive permission/authorization should be required to access the file.

Denis Bourgeois's avatar Denis Bourgeois  ( Jan 21 )

Let me know if this link works: https://drive.google.com/drive/folder...

ms0130's avatar ms0130  ( Jan 21 )

linked files now publicly accessible - thanks!


For some reason, I can't seem to activate the preprocessor to generate the GroundHeatTransfer:Slab objects (E+ CLI on MacOS), so I'm hoping others can help you out.

Denis Bourgeois's avatar Denis Bourgeois  ( Jan 21 )