UnitVentilator do not appear any cooling load from the coil
Hello everyone,
I am trying to do the simulation with contain both of OAU and FCU into 1 room. So, I adapted to use the HVAC air loop for FCU then the UnitVentilator use for the OAU. In this case i found problem that cooling coil water of the UnitVentilator do not show any cooling load.
One more question, is it possible to control room dewpoint by changing the working condition only from that UnitVentilator
Thank you so much., i have attach the like for my idf: link text
@Supakit it looks like you need to change the sharing settings on Google Drive so that anyone with the URL you shared can access the file(s) -- it just asked me to request permission when I tried the URL.
Also, this seems very similar to your other post about the combination of the OAU & FCU. Is this the same project?
Yes, they are the same project.
Right now, I figure out this problem because I forgot to set the setpoint. However, the problem is that my testing chamber there are no set point. So, I replace this by using AirTerminal:DualDact:VAV:OutdoorAir with 2 loop of FCU and OA and It's seemed work. But I am not sure, this approach is best for my problem or not.
Thank you so much for your kind response.
P.S. I am update the link, is it accessible?
@Supakit yes, the IDF is now accessible -- thanks for updating the share settings!